Tag Archive: Inverter

Jun
26

Mitsubishi Electric OEM Starter Pack

                                                                                                   

Mitsubishi Electric OEM Starter Pack

                                                                                                                                                                                                                                                            Small Machine Solution

Mitsubishi Electric’s solution for small machines delivers a totally integrated automation architecture which is based on using standard networking components and provides a cost effective, yet powerful and scalable solution. The solution is based on using automation components, such as PLCs, HMIs and Inverters, all complete with embedded communication ports, at no extra cost.

Key Benefits

  • Total automation offering•
  • Flexible architecture
  • Easy set up
  • Reduced engineering time
  • Networking at no extra cost
  • Scalable solution
  • Advanced diagnostic capability
  • Reduced downtime
  • In built security features
  • Quality and reliability
  • Designed to meet the needs of Industry 4.0

Save 70% with our OEM Starter Pack Offer!

This pack is just £999 and includes the following:

  • FX5U-32MR/ES: iQ-F PLC 16 I/P 16 O/P
  • GT2107-WTSD: Widescreen GOT HMI
  • FR-E720S-050SC-ENE: 0.75 KW, 5.0A 1 phase compact inverter
  • Ethernet mini switch: for network management
  • iQ-Works: Programming suite for PLCs, HMIs, Inverters and Motion Control (including 2
    licences)

If you would like to receive more information about our OEM Starter Pack, please call 0116 233 9555 referencing Ordering Code 332191

 

 

 

Leave a Comment
May
08

Technical Tip – Inverter analogue control with STF Start Command

 

Mitsubishi Inverter analogue control with STF Start Command

 

 

 

Here is a technical setup tip for a Mitsubishi FR-D700  series Inverter with an analogue control signal, whether its from PLC or a Potentiometer. In this example a 4-20mA signal is used and you can use this method through out the FR series range of Inverters manufactured by Mitsubishi.

CLICK HERE for your Technical Tip in PDF

 

 

Leave a Comment
Mar
05

New – Mitsubishi FR-A800 Frequency Inverter

New from Mitsubishi is the FR-A800 Frequency Inverter which has been designed for unparalleled drive precision, speed control, simple start-up, and versatility.  The Mitsubishi FR-A800 is a new generation of drive technology.

fr_a_800n

Mitsubishi’s FR-A800 has some outstanding features which include the integrated high level PLC, USB port for programming and parameter copying, an-easy to-read control panel, optimum power usage and energy saving functions, improved system safety, three expansion slots for a range of option and supported network card.

The FR-A800 Series is fully backwards compatible with the FR-A700 series and its parameters can be easily copied by FR Configurator2. In order to match the former machine response time, the input/output signals of the FR-A800 can be delayed.

The FR-A800 series has some powerful features and intelligent functions which include a two channel emergency stop for safe shutdown. This ensures safe operation in compliance with the European Machinery Directive without installation of another contactor. The FR-A800 thus conforms to the EN ISO13849-1/PLd cat. 3, EN 61508 and EN 61800-5-2 SIL2 standards.

The operation panel with the one touch Digital Dial allows direct access to all important parameters. The FR-A800 series also allows the connection of a Mitsubishi Electric graphical operation terminal (GOT). Communication parameters for the HMI connection are automatically set as a batch.

The FR-A800 has a built in EMC filter which ensures full compliance with European EMC Directive standards (EN 61800-3 2nd environment category C3), so separate certification is not required for the drive.  To suit your application, take advantage of the energy saving function, the impressive savings can be displayed on the energy monitor.  With an estimated lifespan of 10 years, the cooling fans and built in capacitors can be further extended by using the ON/OFF control function

The FR-A800 can be controlled and monitored by a controller via network.  Communication options are available for the major network protocols such as CC-Link IE Field, CC-Link, Profibus DP/DPV1, Profinet/Ether- Net IP/EtherCat (to be released soon) and SSCNETIII/H as well as DeviceNet™ and LONWORKS.  RS485 communication (Mitsubishi Electric drive protocol, Modbus-RTU protocol) is supported as standard.

Mitsubishi FR-A800:-

  • High Speed Response: With a speed response of 50Hz, A800 to respond to a change in motor load. A800 reacts to a speed signal much faster too – between 2 to 3 ms as opposed to 5 to 20 ms with A700.
  • Wide Speed Range: 200:1 speed range open loop, 1500:1 closed loop speed range.
  • Extended Maximum Speed: A standard A800 VFD can drive high speed motors at up to 590Hz, compared to the A700’s 400Hz.
  • IPM Motor Control: Standard A800 VFDs can drive the new generation IPM (Internal Permanent Magnet) motors, such as the Marathon ‘SyMAX’ series.
  • Safety Stop: A800 is a SAFETY drive. “STO” capability enables SIL2 / PLd category emergency stops.
  • Compatible with USB stick: VFD settings can be easily uploaded or downloaded and ‘black box’ operating data at the time of a drive trip can be copied for diagnosis using the FR-Configurator software.
  • GOT interface: Automatic connectivity to GOT 2000 series GOTs without the need to change any parameters.
  • Improved PLC: A800 has a new internal PLC based around the Mitsubishi ‘L series’ processor. Instructions in the form of ‘Function Blocks’ can now be used.
  • Conformal Coating: All A800 VFDs have Conformal Coated boards as standard.

If you would like a brochure emailing over or require a quotation, get in touch !

 

 

Leave a Comment

Authorised Distributor of...