Archive for May, 2018

May
22

iQ Platform and Robots

MELFA Robots

 

 

 

On this year’s Drives and Control Stand Mitsubishi previewed a prototype of the new MELFA CoBOT. This arm will be aimed at the collaborative robot market offering increased rapidity and higher IP rating than the competition as well as easy to use software, direct teaching and collision detection. Mitsubishi showcased a MELFA Robot mounted on an automated guided vehicle (AGV) showing alternatives to conceptual uses for these products.

 

 

 

 

On-Line Configurators

 

 

 

 

 

 

 

 

 

 

 

 

 

The online configurators for iQ-R, iQ-F, Q series, L series, F series and networks have been updated on the Mitsubishi web site. New features include:

– Quickly visualise the number of I/O points and total current consumption required for modules during selection.
– “Purchase list” with selected module name and quantity can be printed.
– “Configuration chart” based on selected models can be printed
– Configuration Image can be printed

These tool can be found at

http://www.mitsubishielectric.com/fa/products/cnt/plc/ex/select/index.html

May
08

Technical Tip – Inverter analogue control with STF Start Command

 

Mitsubishi Inverter analogue control with STF Start Command

 

 

 

Here is a technical setup tip for a Mitsubishi FR-D700  series Inverter with an analogue control signal, whether its from PLC or a Potentiometer. In this example a 4-20mA signal is used and you can use this method through out the FR series range of Inverters manufactured by Mitsubishi.

CLICK HERE for your Technical Tip in PDF

 

 

May
01

iQ-F firmware update, NEW FEATURES

           iQ-F firmware update, new features

One of the great features of the iQ-F range is that we can update the CPU’s firmware, giving customers the ability to take advantage of new features and performance enhancements even on existing installations.

The latest version is 1.060 and is available for download from the MyMitsubishi site. Installation is simple and is executed    using a standard SD memory card. The best place to check how to update the iQ-F is in the e-manual (just search for “firmware update function” in the iQ-F FX5 User’s Manual (application)).

The attached document contains more details plus additional information about the new FX5 analogue modules that were recently added to the range.

Click here to see brochure…

Authorised Distributor of...